RD982i | RD982i-S
Hytera Hytera RD982i DMR Repeater | EOL (End of Life)
Hytera RD982i Repeater The Hytera RD982i Repeater is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well as integrated with Hytera SmartDispatch or other 3rd party GPS dispatching software. The RD982i Repeater is capable of being upgraded to trunking at a future date as capacity requirements increase. The analog version of the RD982i provides organizations with an easy migration path to digital technology. The RD982i comes with a PWC11 power cable. The repeater has a 3 year warranty (1 year on the power cable). *THIS PRODUCT IS END-OF-LIFE. Product Features: Dual Mode: Analog & Digital Dual Mode Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users and ensuring a smooth transition to Digital technology. 50W High Power Maximum repeating power of 50W, thus increasing the system coverage with lesser setup types of equipment. 16 Channels A maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater’s front panel channel knob, or via the channel steering from the repeater’s rear port. Heat Dissipation The unique cooling design combining a built-in heat pipe and a temperature-controlled fan ensures quick heat dissipation, enabling the repeater to operate efficiently even with full power. Management Software With the management software, you can remotely monitor and diagnose a repeater. In addition, you can either record or play back the audio freely in digital mode. Expansion Ports This allows third parties to develop accessory and applications via front and rear port of the repeater. This is achieved via the signal streaming and pin control through the repeater ports. Dual Slot Digital Audio Streaming Streaming of both the voice slots via the rear port accessory pins, allowing the third party for capability expansion. Continuous Wave Identification (CWID) Analog transmission of the repeater identification in Morse code format. Analog Scan Analog voice and signaling scan, allowing coverage of different analog voice users from various groups. Over-the-air Signaling Encryption For secure communications, RD982i supports over-the-air encryption to protect the signaling frames of both voice and data services. RD982i Brochure Digital (DMR) Upgrade License - SW000002 IP Connect License - SW00008 New RD982i Replacement - HR1062 Atlantic Radio is a Hytera Diamond Dealer.
$1,512.00$1,360.80
Hytera Hytera RD982i-S Digital (DMR) & Analog Repeater
HYTERA RD982I-S DIGITAL AND ANALOG 50 WATT REPEATER The RD982i-S Repeater is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well as integrated with Hytera SmartDispatch or other 3rd party GPS dispatching software. The RD982i Repeater is capable of being upgraded to trunking at a future date as capacity requirements increase. The analog version of the RD982i provides organizations with an easy migration path to digital technology. RD982i-S Data Sheet Repeater Features • RD982i-S 50W is an enhanced version of the RD982i DMR digital repeater• 100% continuous duty cycle from 5W to 50W• Up to 16 channels• Supports two simultaneous voice paths in digital mode• Supports operation in Analog and Digital mode• Auto detection between analog mode and digital mode• Multiple CTCSS/CDCSS in analog and mixed channel• Four programmable keys to improve ease-of-use and increase operator efficiency• Advanced heat sink design with thermal-controlled cooling fan for durable operation• External power supply• Supports built-in duplexer with Hytera built-in duplexer installation kit• Repeater Diagnostic and Control (RDAC)• Power on user logo programming• Multi-language menu display• Basic encryption (standard)• Enhanced encryption (license required)• SIP capable to support telephone interconnect• Supports XPT digital trunking (licensed required)• IP Site Connect (Analog and Digital mode) (license required) - SW00008• 3-Year Standard Warranty
$3,081.75$2,773.58
Hytera Hytera PC47 Programming Cable for Mobiles & Repeaters
Hytera PC47 USB Programming Cable with CPS/DL in-line switch The Hytera PC47 is a programming cable for mobile radios and repeaters. The PC47 has a USB connector for PC computers. The cable features a CPS/DL in-line switch for using in either mode (programming or upgrading firmware). Software sold separately. *NO RETURNS - RETURN POLICY PC47 COMPATIBILITY MD652i MD782i HM652 HM682 HM782 RD962i RD982i RD982i-S HR1062 HR652 PC47 SOFTWARE MD652i Download Link MD782i Download Link HM652 & HM682 Download Link HM782 Download Link RD962i, RD982i, & RD982i-S Download Link HR1062 Download Link HR652 Download Link PC47 WARRANTY One-year warranty on the PC47.
$57.10$44.95
Hytera Hytera PC37 Programming Cable for Mobile Radio and Repeater (USB)
Hytera PC37 USB Programming Cable for Mobiles and Repeaters The Hytera PC37 is a programming cable for mobile radios and repeaters. The PC37 has a USB connector for PC computers. Software sold separately. *NO RETURNS - RETURN POLICY PC37 COMPATIBILITY MD652i MD782i HM652 HM682 HM782 RD962i RD982i RD982i-S HR1062 HR652 PC37 SOFTWARE MD652i Download Link MD652i USB Drive MD782i Download Link MD782i USB Drive HM782 Download Link HM782 USB Drive RD962i, RD982i, & RD982i-S Download Link RD962i, RD982i, & RD982i-S USB Drive HR1062 Download Link HR1062 USB Drive PC37 WARRANTY One-year warranty on the PC37.
$46.90$37.95
Hytera Hytera BRK09 Mounting Bracket for RD982i Internal Duplexer Install
Hytera BRK09 The Hytera BRK09 is an internal duplexer installation kit for the RD982i, RD982i-S. The installation kit includes an aluminum bracket, prefab jumper cables and hardware. *1-year manufacturer's warranty.
$82.70$64.35
Hytera Hytera PWC11 DC Power Cable Red/Black 10A 12AWG 3000MM PWC11 00
Hytera PWC11 The Hytera PWC11 is a DC power cable red/black 10A 12AWG 3000MM PWC11 00. This cable works with the following repeaters: RD982i, RD982i-S. *1-year manufacturer's warranty.
$50.90$41.58
Hytera Hytera SM16A1 Palm Microphone (IP54) for Mobiles & Repeaters
Hytera SM16A1 Palm Microphone (IP54) for Mobiles & Repeaters The Hytera SM16A1 is the standard microphone for mobiles and repeaters. The SM16A1 has a 10-pin aviation connector with an IP54 rating against physical damage. SM16A1 COMPATIBILITY MD782i (MD782) RD622i (RD622) RD982i (RD982) RD982i-S HM682 HM782 HR652 HR1062 MNC360 SM16A1 SPECIFICATIONS Sensitivity: -26±3dB @1KHz (0dB＝1v/Pa); Output impedance: ≤2.2kΩ; Directionality: omni-directional Size: 82.0*56.0*32.2 (mm) Weight: about 120.0g Operating Temperature: -30~65℃ WARRANTY *1-year manufacturer's warranty.
$69.10$65.64
Hytera Hytera PS22002 External Power Supply, 220W, Backup Power Supply Battery Applicable
Hytera PS22002 Ensure Reliable Power with the Hytera PS22002 External Power Supply Need a robust power solution for your Hytera repeaters or mobile radios? The Hytera PS22002 is a 220W external power supply designed to provide consistent and reliable power to your compatible Hytera devices. With its backup battery capability, you can ensure continuous operation, even during power outages. Here's why the PS22002 is the ideal power solution: High Power Output: Delivers 220W of power to support demanding applications. Backup Battery Support: Connect a backup battery to ensure uninterrupted operation during power failures. Wide Compatibility: Works seamlessly with a range of Hytera repeaters and mobile radios. Durable Construction: Built to withstand tough conditions and provide long-lasting performance. Compatible with these Hytera repeaters: RD622i RD982i RD982i-S HR652 HR1062 Compatible with these Hytera mobile radios: MD612i MD622i MD652i MD782i HM652 HM682 HM782 Warranty: 1-year manufacturer's warranty Keep your Hytera communication systems running smoothly with the PS22002 external power supply. Order yours today!
$390.40$299.00
Hytera Hytera POA45
Hytera POA45 Surge arrester for ethernet port (RoHS). *1-year manufacturer's warranty.
$99.20$81.08
Hytera Hytera BRK18 Installation Bracket For Power Supply
Hytera BRK18 The Hytera BRK18 is an installation bracket for power supply. This bracket works with the following Hytera repeaters: RD982i, RD982i-S. *1-year manufacturer's warranty.
$67.60$55.29
Hytera Hytera BRK19 Wall Mount Installation Bracket For The Repeater
Hytera BRK19 The Hytera BRK19 is a wall mount installation bracket for the repeater. This bracket works with the following repeaters: RD982i, RD982i-S. *1-year manufacturer's warranty.
$90.10$73.71
Hytera Hytera BRK12 Installation Accessory For Rack-Mounted Power Supply (2U) (Black)
Hytera BRK12 The Hytera BRK12 is an installation accessory for rack-mounted power supply (2U) (Black). This accessory works with the following Hytera repeaters: RD982i, RD982i-S. *1-year manufacturer's warranty.
$82.70$67.57
Hytera Hytera BRK16 Build-In Duplexer Installation Kit For DT11-DT17
Hytera BRK16 The Hytera BRK16 is a build-in duplexer installation kit for DT11-DT17. This kit works with the following Hytera repeaters: RD982i, RD982i-S. *1-year manufacturer's warranty.
$123.20$100.74
Hytera Hytera PC49 Back-to-Back Data Cable
Hytera PC49 The Hytera PC49 is a back-to-back data cable. HM782 to HM782 or HR1062 to HR1062 back to back cable, DB26 to DB26, length 60cm (23.6 in). *1-year manufacturer's warranty.
$46.90$44.91
Hytera Hytera SM16A3 Remote Microphone
Hytera SM16A3 The Hytera SM16A3 is a remote microphone without speaker used with SM09S1. This microphone works with the following car kits: CK03, CK03-E, CK02, CK02-E, CK05. *1-year manufacturer's warranty.
$69.10$56.51
Hytera Hytera SW00008 IP Connect License for Repeater
Hytera SW00008 - Repeater IP Connect The Hytera SW00008 is an IP connect license for Hytera repeaters. The SW00008 enables the repeater to connect to the internet and have an IP connection with other repeaters. This software license works with the following Hytera repeaters: RD622i, RD962i, RD982i, RD982i-S, RD982i-S 100W, HR652 and HR1062. *Hytera Feature Licenses are non-refundable.
$368.30$219.00
Hytera Hytera SW00002 Feature License - Digital (DMR) Upgrade License
Hytera SW00002 The Hytera SW00002 is a feature license upgrade key for analog-only repeaters. The SW00002 gives analog-only repeaters digital (DMR) capability. This license is most commonly used for the Hytera RD982i-AN (repeater model that is analog-only). This license (zip file) will be emailed 48-72 hours after the order is placed. *Enables 1 repeater for digital (DMR). **Hytera Feature Licenses are non-refundable.
$1,183.80$799.00
Hytera Hytera SW00018 AES256 Encryption License for a Repeater
Hytera SW00018 AES256 Encryption License for a Hytera Repeater The Hytera SW00018 is an advanced digital encryption license for repeaters. The SW00018 will allow you to use AES256 encryption on a Hytera repeater. The SW00018 feature license is compatiable with these Hytera repeaters: HR1062 HR652 RD622i RD962i RD982i RD982i-S *Feature license not eligible for further discounts. More information on Hytera encryption. *1 license required per repeater. **License will take 48 to 72 business hours to process and will be delivered via email. ***Hytera Feature Licenses are non-refundable.
$340.70$220.50
Hytera Hytera DT-13010100000030 Single Site XPT License for Repeater
Hytera DT-13010100000030 The Hytera DT-13010100000030 is a single site XPT license for repeater. This software license works with the following Hytera Repeaters: HR1062, RD982i-S. *Feature license not eligible for further discounts.
$2,005.50$1,718.96
Hytera Hytera DT-13010100000031 Multi-Site XPT License (upgrade from single site) for Repeater
Hytera DT-13010100000031 This Hytera DT-13010100000031 is a multi-site XPT license (upgrade from single site) for repeater. This software license works with the following Hytera repeaters: HR1062, RD982i-S. *Feature license not eligible for further discounts.
$463.10$396.90
Hytera Hytera DT-13010100000032 Multi-Site XPT License (upgrade from conventional) for Repeater
Hytera DT-13010100000032 The Hytera DT-13010100000032 is a multi-site XPT license (upgrade from conventional) for Repeater. This software license works with the following Hytera repeater: HR1062, RD982i-S. *Feature license not eligible for further discounts.
$2,508.20$2,149.88
Hytera Hytera DT-13020100000022 DMR Trunking Lite Transceiver Upgrade License for Repeater
Hytera DT-13020100000022 The Hytera DT-13020100000022 is a DMR Trunking Lite Transceiver Upgrade License for Repeater. This software license works with the following Hytera repeater: RD982i-S *Feature license not eligible for further discounts.
$1,711.43
Hytera Hytera PC142 Wireless Link Back-to-Back Cable, DB9 to DB26
Hytera PC142 The Hytera PC142 is a wireless link back-to-back cable for Hytera mobiles and repeaters. The PC142 is a DB9 to DB26 connector. This cable is an integral component for wireless link configurations. It is 39.5 inches in length. *1-year manufacturer's warranty.
$48.10$39.83
Hytera Hytera RPT-EW Extended 2 Year Warranty
Hytera RPT-EW The Hytera RPT-EW is an extended 2 year warranty for Hytera repeaters This extended warranty brings the warranty to 5 years at the time of purchase. Hytera RPT-EW can be added to these repeaters at the time of purchase: HR1062, HR652, RD982i, RD982i-S.
$661.50$567.00
Hytera Hytera SM16A2 Waterproof Palm Microphone (IP67)
Hytera SM16A2 The Hytera SM16A2 is a waterproof palm microphone (IP67). This palm microphone works with the following Hytera DMR mobile radio: HM782, MD782i. This palm microphone works with the following Hytera repeater: HR1062, RD982i, RD982i-S. *1-year manufacturer's warranty.
$91.70$74.97
Hytera Hytera SM10A1 Desktop Microphone for Mobiles & Base Stations
Hytera SM10A1 DESKTOP MICROPHONE FOR MOBILE & BASE STATIONS The Hytera SM10A1 is a desktop microphone for mobiles and base stations. The microphone is typically placed on a desktop in the office in order to aid at dispatching. The SM10A1 has a 10-pin connector and is about 107* 65* 148.6mm in dimensions. SM10A1 COMPATIBILITY HM782 HR1062 MD782i RD982i RD982i-S MNC360 WARRANTY *1-year manufacturer's warranty.
$105.20$86.00
Hytera Hytera PC40 Programming & Patrol Cable
Hytera PC40 The Hytera PC40 is a programming and patrol cable, USB port. This cable works with Hytera repeaters. *NO RETURNS - RETURN POLICY PC40 COMPATIBILITY: MD782i RD982i RD982i-S WARRANTY *1-year manufacturer's warranty.
$52.90$43.25
Hytera Hytera PC110 Back-to-Back Cable, DB26 to DB26 - Digital/Analog & UHF/VHF
Hytera PC110 The Hytera PC110 is a back-to-back cable for Hytera mobiles and repeaters. The PC110 is a DB26 to DB26 connector. This cable is an integral component for mixed-mode and cross-band configurations. It is 29 inches in length. Ideal for the MD782i, HM782, RD982i, RD982i-s and HR1062. *1-year manufacturer's warranty.
$48.10$34.96
Hytera Hytera Customer Programming Software
Hytera Programming Software Customer Programming Software, Firmware & Driver This product includes the latest programming software, firmware and driver versions for one Hytera radio model that does not have a listing. Please visit our Hytera Software Collection to find your corresponding software package for your radio here. This product does not include wideband entitlement and is only compatible with a Windows PC. Mac computers will not work with this software license. The Hytera Programming Cables programming cable (not included) is required to connect Hytera radios to the Windows computer. The customer programming software license includes 12 months of updates. North American software versions are only included. Please ask about support kits for other regions. There are two methods of delivery for this item: download link or USB. Upon download link purchase, an email link will be sent within 24 hours. No shipping is required, but a valid email address is required. Upon USB purchase, a USB drive containing the software will be shipped. A shipping address is required. No returns or refunds. This software package does not include support.
$49.95$44.95
Hytera Hytera ADA-01 Bluetooth Adapter Compatible With MD782i
Hytera ADA-01 The Hytera ADA-01 is a Bluetooth adapter for connecting compatible accessories with these Hytera mobiles and repeaters: MD652i MD782i HM782 RD982i HR1062 WARRANTY *1-year manufacturer's warranty.
$139.70$114.26
Hytera Hytera HYT-50030100001305 Chip Resistor for RD982i
Hytera HYT-50030100001305 The Hytera HYT-50030100001305 is a chip resistor for the RD982i. Manufacturer's description: Chip Resistor CRCW12104R70JNEAHP 4.7Ω J 3/4W 155°C 1210 (RoHS)&3001094790000
$5.95$1.75
Hytera Hytera HYT-11500000003088 45W PA Semi-Finished Board with Cooling Fin
Hytera HYT-11500000003088 The Hytera HYT-11500000003088 is a 45W PA semi-finished board with cooling fin for the frequency range of 136-870MHz. HYT-11500000003088 COMPATIBILITY RD982i RD982i-S
$54.35$32.50
Hytera Hytera HYT-11520000000485 RD982i PA Module
Hytera HYT-11520000000485 RD980 U(1) PA module kit (maintenance/with black radiator) (RoHS)
$599.00$409.00
Hytera Hytera SM19A1 Hand Microphone with a DTMF Keypad
Hytera SM19A1 The Hytera SM19A1 is a hand microphone with a DTMF keypad and programmable buttons. The SM19A1 is compatible with these Hytera mobile two-way radios and repeaters: HM782 MD782i HM682 RD982i HR1062 RD622i HR652 RD962I *1-year manufacturer's warranty.
$135.20$121.68
Hytera Hytera RD982i-S Repeater for Digital (DMR) & Analog | Preowned
Hytera RD982i-S Digital DMR and Analog 50 Watt Repeater The RD982i-S Repeater is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well as integrated with Hytera SmartDispatch or other 3rd party GPS dispatching software. The RD982i Repeater is capable of being upgraded to trunking at a future date as capacity requirements increase. The analog version of the RD982i provides organizations with an easy migration path to digital technology. Hytera RD982i-S Main Features • RD982i-S 50W is an enhanced version of the RD982i DMR digital repeater• 100% continuous duty cycle from 5W to 50W• Up to 16 channels• Supports two simultaneous voice paths in digital mode• Supports operation in Analog and Digital mode• Auto detection between analog mode and digital mode• Multiple CTCSS/CDCSS in analog and mixed channel• Four programmable keys to improve ease-of-use and increase operator efficiency• Advanced heat sink design with thermal-controlled cooling fan for durable operation• External power supply• Supports built-in duplexer with Hytera built-in duplexer installation kit• Repeater Diagnostic and Control (RDAC)• Power on user logo programming• Multi-language menu display• Basic encryption (standard)• Enhanced encryption (license required) (License Required) - SW00018• SIP capable to support telephone interconnect• Supports XPT digital trunking (licensed required)• IP Site Connect (Analog and Digital mode) (license required) - SW00008• 1-Year Standard Warranty RD982i-S Data Sheet
$3,081.75$2,595.00
-
Hytera Hytera RD962i, RD982i, & RD982i-S Customer Programming Software & Firmware
Hytera RD962i, RD982i, & RD982i-S Software Customer Programming Software, Firmware & Driver This product includes the latest programming software, firmware and driver versions for the RD962i, RD982i, and RD982i-S for customer use. If historical versions are required, then the archive software package may be required. The archives software package is found here. This software package does not include wideband entitlement and is only compatible with a Windows PC. Mac computers will not work with this software license. The Hytera PC37 programming cable (not included) is required to connect the RD962i, RD982i, or RD982i-S to the Windows computer. The customer programming software license includes 12 months of updates. North American software versions are only included. Please ask about support kits for other regions. There are two methods of delivery for this item: download link or USB. Upon download link purchase, an email link will be sent within 24 hours. No shipping is required, but a valid email address is required. Upon USB purchase, a USB drive containing the software will be shipped. A shipping address is required. No returns or refunds. This software package does not include support.
$49.95$44.95
-
Hytera Hytera Archived Programming Software & Firmware
Hytera Historical Software Archived Programming Software & Firmware Atlantic Radio has a collection of Hytera archived software for radio models. The item includes the customer programming software, firmware and driver for one model radio. There are two methods of delivery for this item: download link or USB. Upon download link purchase, an email link will be sent within 24 hours. No shipping is required, but a valid email address is required. Upon USB purchase, a USB drive containing the software will be shipped. A shipping address is required. No returns or refunds. This software package does not include support.
$199.00$89.95
Hytera Hytera PWC27 Power Cord for 100 Watt RD982i-S
Hytera PWC27 Power Cord for 100 Watt RD982i-S Repeater The Hytera PWC27 is a power cord for the RD982i-S 100W. PWC27 WARRANTY 1-year manufacturer's warranty.
$112.70$83.23
Hytera Hytera SM25A1 Microphone for Hytera Mobiles & Bases
Hytera SM25A1 Mobile & Base Microphone with Display & Keys The Hytera SM25A1 is a remote speaker microphone for Hytera mobile and base two-way radios. The SM25A1 has an LCD display, limited keypad and 7 foot coiled cable. The SM25A1 has an IP54 rating. *1-year manufacturer's warranty.
$166.70$150.03
Hytera Hytera HYT-5117000000116B Front Panel Handle for RD982i Repeater (5117000000280A)
Hytera HYT-5117000000116B FRONT PANEL HANDLE FOR RD982i The Hytera HYT-5117000000116B (5117000000280A) is a replacement faceplate/front panel handle for a Hytera repeater. This part is 2.75 inches long and is black. It can be used on either side of the faceplate. Screws are not included with this handle. This part was, also, referred to as HYT-5117000000280A. Manufacturer's description: Handle on front panel of RD980 repeater ADC12 grinding+powder spraying, black 01 ( (RoHS)(REACH)&6300143000010 HYT-5117000000116B COMPATIBILITY RD982i RD982i-S
$9.93
Hytera Hytera HYT-51010300000040 Rotary Switch for RD982i
Hytera HYT-51010300000040 The Hytera HYT-51010300000040 is a rotary switch for RD982i repeater. Manufacturer's description: Rotary switch RE1203XC1-H01 DC 5V 0.5mA -30°C~+80°C 14*15*36.5 (RoHS)(REACH)&4399030000130 HYT-51010300000040 COMPATIBILITY RD982i
$11.23
