Radio Repeaters
Hytera Hytera HR1062 Repeater for Two-Way Radios
Hytera HR1062 Digital & Analog Repeater for Two-Way Radios The HR1062 Radio Repeater, a new state-of-the-art radio repeater, are providing a more efficient and reliable experience with outstanding performance, compact size, flexible power options, and unparalleled system interconnect capabilities. The Hytera HR1062 radio repeater is designed as an intelligent and seamless communication platform with the flexibility to connect with a variety of systems. A back-to-back solution provides a cross-band communication IP Link between two repeaters to enable connectivity to analog and digital radios, or radios with different frequencies. The XPT Trunking System is a widely-deployed, cost-efficient, and easily expandable radio system from Hytera. Wireless Link Communication provides a wireless connection between two systems when there is no IP link. HR1062 Brochure HR1062 VERSIONS HR1062-U1 - UHF (400-470MHz) - MSRP $3,323.30 HR1062-V1 - VHF (136-174MHz) - MSRP $3,323.30 HR1062 FEATURES 1U Compact Form Factor Outstanding Performance and Reliability Flexible Interconnection to SIP Phones and Trunking Systems Integrated AC Power Supply with AC/DC Auto Switch Innovative Features: Compact 1U Form Factor The 1U height is half that of conventional repeaters, and the HR1062 radio repeater features a in-built power supply to save valuable rack space. AC/DC Auto Switch The Hytera HR1062 supports AC/DC auto-switching for locations with different power sources, power redundancy, and eliminates the cost and space required for power adapters. Analog & Digital Auto Switch Mixed channel mode detects the receiving signal and automatically switches between analog and digital mode to provide a simple migration path. Reliable Operation Variable-speed fan provides optimal cooling with front-to-back internal airflow, combined with high-quality components to ensure 100% duty cycle operation for mission-critical applications. Flexible Radio Network Connectivity The HR1062 supports a wide variety of analog and digital radio networks, including Analog and Digital Conventional, DMR Tier II, XPT Trunking, and DMR Tier III Trunking (available in mid-2022). Wide Coverage Enhanced Rx sensitivity extends communication range, and an Ethernet port provides access to IP networks to enable remote site connectivity. DMR - 2 TDMA 2 Time Slots TDMA digital technology provides 2 simultaneous voice channels that improve efficiency and doubles capacity without an extra frequency. Higher Security The Hytera HR1062 supports Digital End-to-End and Over-the-Air Encryption. This optional software-based encryption uses secure and reliable ARC4 and AES encryption algorithms. WARRANTY *3-year manufacturer's warranty.
$2,990.97
Hytera Hytera HR652 Compact Digital Repeater 25 Watts
Hytera HR652 Digital DMR Repeater for Two-Way Radios The Hytera HR652 is the next generation in compact DMR repeaters designed to expand radio range with consistent, reliable, and seamless voice and data communications. It is fully compliant with the DMR standard with TDMA digital technology that provides 2 simultaneous voice channels to double voice channel capacity. Special features: Ultra Compact for Flexible Installations and Portability Optional Battery for Mobile Applications and Backup Power Interconnect Multiple Repeaters with IP-Connect Supports both Analog and Digital modes HR652 Data Sheet WARRANTY 3-Year manufacturer's warranty (1-year on accessories). Other features: Ultra-Compact Form Factor Weighing only 4 pounds, 6 ounces and measuring less than 7” tall (without the optional battery) the HR652 delivers unprecedented performance in a compact form factor. It can be deployed in portable applications or be installed on any at surface in areas with limited wall space. Analog & Digital Auto Switch The HR652 can operate in analog mode, DMR mode, or dynamic mixed digital/analog mode, which automatically switches between analog and digital calls, and provides an ideal solution for smooth analog to digital migration with minimal investment. Reliable Operation The HR652 is built to perform in harsh environments with MIL-STD-810H compliance for ruggedness and impact resistance, and IP54 rated for dust and water intrusion. The HR652 can be congured for 25W high power transmission or variable Wattage low power transmission for localized coverage and preventing interference. Higher Security The HR652 supports Digital End-to-End and Over- the-Air Encryption with optional ARC4 and AES advanced encryption algorithms. Farther Coverage The HR652 features industry-leading RX sensitivity and 25 Watts output power, increasing the effective communication range for DMR radios throughout a campus, or on each floor of a high-rise building. It covers more area than other compact repeaters, delivering cost-effective coverage for the entire facility. The HR652 also functions as a Single Frequency Repeater that uses both DMR timeslots to receive and forward calls over a single frequency in Direct Mode. Optional Battery Power The HR652 features an optional battery for portable applications and for battery backup in xed indoor installations in the event of a power outage. The 12.5Ah large-capacity battery can provide up to 4 hours at 25W. Fast charging technology enables the battery to be fully charged in just 3.5 hours with the optional AC/DC power adapter 100W fast charger. Portable The HR652 can be equipped with the optional battery, dedicated antenna, GPS, and a light backpack for mobile search and rescue operations. It can also be deployed in vehicles for mobile coverage and powered by the vehicle battery. The ultra-light design can be used with drones to achieve a wider range of signal coverage.
$2,450.00$2,205.00
Motorola Motorola SLR5700 Digital Repeater for Two-Way Radios
Motorola SLR5700 Digital Repeater for Two-Way Radios | 50 Watts The Motorola MOTOTRBO SLR5700 is a powerful 50 watt repeater used in digital (DMR) and analog radio networks. Supports all MOTOTRBO system architectures while delivering high-performance, high reliability two-way radio service. Also, it supports two simultaneous voice paths in digital TDMA mode. The SLR5700 has a sleek, rack mount form factor (1U) and low-thermal, low-power consumption footprint that is designed and engineered for low cost of ownership. It features field-replaceable Power Amplifier, Power Supply, and Modern modules. Includes a 3A battery charger and an auxiliary power output to easy site installation. This repeater comes in UHF low band (403-470), UHF high band (450-512) or VHF band (136-174). Motorola SLR5700 Features 1 Channel Analog and Digital Mode 12.5 kHz 1-50W of Transmit Power 100% Continuous Duty Cycle Size: 175H x 19W x 14.6D Weight: 16 lbs. Remote Diagnostics Sleek Form Factor Internal Power Supply Frontal Panel USB Port External Alarm Ports Multiple Software Options Wall Mount Kit (optional) MOTOROLA SLR5700 WARRANTY Two-year manufacturer's warranty. SLR5700 DATA SHEET
$4,750.00$3,665.00
Hytera Hytera RD982i DMR Repeater | EOL (End of Life)
Hytera RD982i Repeater The Hytera RD982i Repeater is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well as integrated with Hytera SmartDispatch or other 3rd party GPS dispatching software. The RD982i Repeater is capable of being upgraded to trunking at a future date as capacity requirements increase. The analog version of the RD982i provides organizations with an easy migration path to digital technology. The RD982i comes with a PWC11 power cable. The repeater has a 3 year warranty (1 year on the power cable). *THIS PRODUCT IS END-OF-LIFE. Product Features: Dual Mode: Analog & Digital Dual Mode Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and Digital users and ensuring a smooth transition to Digital technology. 50W High Power Maximum repeating power of 50W, thus increasing the system coverage with lesser setup types of equipment. 16 Channels A maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel change can be performed either via RDAC PC tools, via the repeater’s front panel channel knob, or via the channel steering from the repeater’s rear port. Heat Dissipation The unique cooling design combining a built-in heat pipe and a temperature-controlled fan ensures quick heat dissipation, enabling the repeater to operate efficiently even with full power. Management Software With the management software, you can remotely monitor and diagnose a repeater. In addition, you can either record or play back the audio freely in digital mode. Expansion Ports This allows third parties to develop accessory and applications via front and rear port of the repeater. This is achieved via the signal streaming and pin control through the repeater ports. Dual Slot Digital Audio Streaming Streaming of both the voice slots via the rear port accessory pins, allowing the third party for capability expansion. Continuous Wave Identification (CWID) Analog transmission of the repeater identification in Morse code format. Analog Scan Analog voice and signaling scan, allowing coverage of different analog voice users from various groups. Over-the-air Signaling Encryption For secure communications, RD982i supports over-the-air encryption to protect the signaling frames of both voice and data services. RD982i Brochure Digital (DMR) Upgrade License - SW000002 IP Connect License - SW00008 New RD982i Replacement - HR1062 Atlantic Radio is a Hytera Diamond Dealer.
$1,512.00$1,360.80
Icom Icom URFR5300 VHF Digital Repeater | 50 Watts
Icom URFR5300 VHF REPEATER FOR ANALOG & DIGITAL (NXDN) RADIOS The Icom URFR5300 is a repeater for two-way radios that works in analog and digital (NXDN) mode. This channel module works in VHF (136-174MHz) and 50 watts of power output. The UR-FR5300 is the perfect option for any VHF repeater application. Atlantic Radio recommends the UR-FR5300 for government, education, ports, marinas, boats, hunting, construction, events and more. AVAILABLE URFR5300 REPEATER VERSIONS UR-FR5300 61 USA (136-174MHz analog/digital IDAS repeater channel module) The Icom UR-FR5300 is programmable by Atlantic Radio or the end-user. For Atlantic Radio Programming Services, please contact us here: Contact Atlantic Radio. For programming, the URFR5300 requires an Icom OPC-2344 programming cable and CS-FR5300 (v1.21) cloning software. The OPC-2344 cloning cable is found here: ICOM OPC2344. The customer programming software is included with the purchase of a UR-FR5300 or OPC2344. Atlantic Radio offers its own line of duplexers that are compatible with the UR-FR5300. These duplexers include tuning and a 2-year warranty. See more information here: Atlantic Radio VHF 50W 6-Cavity Duplexer UR-FR5300 FEATURES VHF (136-174MHz) Digital (NXDN) Analog 50 Watts 25 Watts 5 Watts 32 Channels 13.6 V DC nominal 2.1 kg, 4.6 lb N Type Connections 2-Year Warranty WARRANTY *2-year manufacturer's warranty on the repeater. UR-FR5300 Data Sheet Atlantic Radio is an authorized Icom land mobile radio dealer.
$1,486.00$1,282.00
Ritron Ritron LM-700DMR LoudMouth Wireless PA System
Ritron LM-700DMR The Ritron LM-700DMR is a Digital VHF or UHF LoudMouth stand-alone wireless PA system/intercom. The intercom is equipped with a dual band receiver with 1 channel, but it does not include the companion two-way radio. The LM-700DMRg allows authorized two-way radios to access LM receivers (requires external power) to make PA announcements. It is compatible with other brand two-way radios, using the same technology (DMR digital) and operating in VHF or UHF frequency band. LM-700DMR KEY FEATURES: DMR Digital Only 1 Channel Dual Band, VHF/UHF Receiver PC and Field Programmable “Live” Mode or “Record and Play” Mode Adjustable Speaker Volume (5% to 99%) Max Volume 95dB SPL@ 50 Ft. Recorded Message REPEAT Feature - Up To 4 Times Recorded Message DELAY Feature Visual Alert RELAY Trigger Feature (Requires Optional Strobe & Optional Cablepn 60201136) Switch Input with Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/ speaker. LM Receiver Supports Up To 2 PA Speakers – requires optional pn RYCONN Cable and additional PA Speaker. Designed and Made In The USA Up to 4 Pre-Recorded Stored Messages – Selectively trigger each stored voice message using a UID from the 2-way radio. Signaling Decode: Color Codes, SUID, Destination Type and Destination ID LM-700DMR KIT INCLUDES: Dual band capable receiver (requires optional LMH-100 enclosure for outdoor use) Dual band whip antenna AC adapter (12VDC-110/220V) PA Horn Speaker (25 ft. cord)- Indoor/Outdoor rated LM mounting bracket Note: Does NOT include Optional 2 Hr. Back-Up Battery (BP-LM-Li22)
$910.00$780.00
Ritron Ritron RIB-700DMR Radio-To-Intercom Bridge Receiver
Ritron RIB-700DMR The Ritron RIB-700DMR is an DMR Digital VHF or UHF Radio-To-Intercom Bridge receiver. The receiver is dual band with 1 channel. The receiver connects to your wired PA/Intercom system amplifier and allows authorized 2-way radios to make PA announcements over the wired speaker system. The RIB-600Analog is configurable for either VHF, VHF MURS, UHF, GMRS or FRS frequency band. It provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input, or a 600 Ω, balanced MIC input and is compatible with other brand two-way radios, using the same technology (DMR digital) and operating in VHF or UHF frequency band. RIB-700DMR KEY FEATURES: DMR Digital Dual Band VHF (150-165MHz)/UHF (450-470MHz) Receiver PC and Field Programmable Adjustable Speaker Volume (5% to 99%) Message DELAY Feature REPEAT Message Playback Feature Visual Alert RELAY Trigger Feature – Requires Optional Strobe & Optional Cable pn 60201136 Switch Input w/ Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/speaker. Provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input or a 600Ω balanced MIC input. Designed and Made In The USA Up to 4 Pre-Recorded Stored Messages – Selectively trigger each stored voice message using a UID from the 2-way radio. Signaling Decode: Color Codes, SUID, Destination Type and Destination ID RIB-700DMR KIT INCLUDES: RIB-700DMR Receiver Whip antenna RPS-1B AC adapter (12VDC-110/220V) External connection cable Mounting bracket WARRANTY * 1-year manufacturer's warranty
$840.00$719.00
Ritron Ritron RIB-600Analog Radio-To-Intercom Bridge Receiver
Ritron RIB-600Analog The Ritron RIB-600Analog is an Analog VHF or UHF Radio-To-Intercom Bridge receiver. The receiver is dual band with 1 channel. The receiver connects to your wired PA/Intercom system amplifier and allows authorized 2-way radios to make PA announcements over the wired speaker system. The RIB-600Analog is configurable for either VHF, VHF MURS, UHF, GMRS or FRS frequency band. It provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input, or a 600 Ω, balanced MIC input and is compatible with other brand two-way radios, using the same technology (Analog) and operating in VHF or UHF frequency band. RIB-600ANALOG KEY FEATURES: Analog Dual Band VHF (150-165MHz)/License-Exempt VHF MURS/UHF (450-470MHz) Receiver PC and Field Programmable Adjustable Speaker Volume (5% to 99%) Message DELAY Feature REPEAT Message Playback Feature Visual Alert RELAY Trigger Feature – Requires Optional Strobe & Optional Cable pn 60201136 Switch Input w/ Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/speaker. Provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input or a 600Ω balanced MIC input. Designed and Made In The USA Signaling Decode: CTCSS, DCS, DTMF, 2-Tone or Selcall VHF NOAA Weather Alert Frequencies RIB-600ANALOG KIT INCLUDES: RIB-600Analog Receiver Whip antenna RPS-1B AC adapter (12VDC-110/220V) External connection cable Mounting bracket WARRANTY * 1-year manufacturer's warranty
$758.00$650.00
Ritron Ritron LM-U450System LoudMouth System with JMX-446D Portable
Ritron LM-U450System LOUDMOUTH SYSTEM WITH JMX-446D PORTABLE The Ritron LM-U450System includes the LM-600Analog Wireless PA System along with the JMX-446D Portable Radio. The Ritron LM-600Analog is an Analog VHF or UHF LoudMouth stand-alone wireless PA system/intercom. The intercom is equipped with a dual band receiver with 1 channel.. The LM-600Analog allows authorized two-way radios to access LM receivers (requires external power) to make PA announcements. It is compatible with other brand two-way radios, using the same technology (Analog) and operating in VHF or UHF frequency band. LM-600ANALOG KEY FEATURES: Analog Only 1 Channel Dual Band, VHF/UHF Receiver PC and Field Programmable “Live” Mode or “Record and Play” Mode Adjustable Speaker Volume (5% to 99%) Max Volume 95dB SPL@ 50 Ft. Recorded Message REPEAT Feature - Up To 4 Times Recorded Message DELAY Feature Visual Alert RELAY Trigger Feature (Requires Optional Strobe & Optional Cablepn 60201136) Switch Input with Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/ speaker. LM Receiver Supports Up To 2 PA Speakers – requires optional pn RYCONN Cable and additional PA Speaker. Designed and Made In The USA Signaling Decode: CTCSS, DCS, DTMF, 2-Tone or Selcall VHF NOAA Weather Alert Frequencies JMX-446D KEY FEATURES: UHF (450-470MHz) 2 Watts Up to 10 Channels 2-Tone Paging Encode/Decode 83 Digital Quite Call Codes Normal and Priority Scan Rugged, Reliable Design Bright, Easy-To- Read LED Display Field-Programmable to Table Frequencies CTCSS or DCS Sub Tones Channel Scan Function Loud, Easy-To-Hear Audio Output 9 Hour, 1,500mAH Rechargeable Battery FCC Approved WARRANTY * 1-year manufacturer's warranty.
$1,103.00$945.00
Ritron Ritron LM-V150System LoudMouth System with JMX-146D Portable
Ritron LM-V150System LOUDMOUTH SYSTEM WITH JMX-146D PORTABLE The Ritron LM-V150System includes the LM-600Analog Wireless PA System along with the JMX-146D Portable Radio. The Ritron LM-600Analog is an Analog VHF or UHF LoudMouth stand-alone wireless PA system/intercom. The intercom is equipped with a dual band receiver with 1 channel. The LM-600Analog allows authorized two-way radios to access LM receivers (requires external power) to make PA announcements. It is compatible with other brand two-way radios, using the same technology (Analog) and operating in VHF or UHF frequency band. LM-600ANALOG KEY FEATURES: Analog Only 1 Channel Dual Band, VHF/UHF Receiver PC and Field Programmable “Live” Mode or “Record and Play” Mode Adjustable Speaker Volume (5% to 99%) Max Volume 95dB SPL@ 50 Ft. Recorded Message REPEAT Feature - Up To 4 Times Recorded Message DELAY Feature Visual Alert RELAY Trigger Feature (Requires Optional Strobe & Optional Cablepn 60201136) Switch Input with Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/ speaker. LM Receiver Supports Up To 2 PA Speakers – requires optional pn RYCONN Cable and additional PA Speaker. Designed and Made In The USA Signaling Decode: CTCSS, DCS, DTMF, 2-Tone or Selcall VHF NOAA Weather Alert Frequencies JMX-146D KEY FEATURES: VHF (150-162MHz) 2 Watts Up to 10 Channels NOAA Weather Scan/Alert Rugged, Reliable Design Bright, Easy-To- Read LED Display Field-Programmable to Table Frequencies CTCSS or DCS Sub Tones Channel Scan Function Loud, Easy-To-Hear Audio Output 9 Hour, 1,500mAH Rechargeable Battery FCC Approved Designed and Made in the USA WARRANTY * 1-year manufacturer's warranty.
$1,103.00$945.00
Ritron Ritron LM-600Analog LoudMouth Wireless PA System
Ritron LM-600Analog The Ritron LM-600Analog is an Analog VHF or UHF LoudMouth stand-alone wireless PA system/intercom. The intercom is equipped with a dual band receiver with 1 channel, but it does not include the companion two-way radio. The LM-600Analog allows authorized two-way radios to access LM receivers (requires external power) to make PA announcements. It is compatible with other brand two-way radios, using the same technology (Analog) and operating in VHF or UHF frequency band. LM-600ANALOG KEY FEATURES: Analog Only 1 Channel Dual Band, VHF/UHF Receiver PC and Field Programmable “Live” Mode or “Record and Play” Mode Adjustable Speaker Volume (5% to 99%) Max Volume 95dB SPL@ 50 Ft. Recorded Message REPEAT Feature - Up To 4 Times Recorded Message DELAY Feature Visual Alert RELAY Trigger Feature (Requires Optional Strobe & Optional Cablepn 60201136) Switch Input with Pre-Recorded Message – Allows Optional NO or NC switch to activate a recorded voice message played solely on single attached LM receiver/ speaker. LM Receiver Supports Up To 2 PA Speakers – requires optional pn RYCONN Cable and additional PA Speaker. Designed and Made In The USA Signaling Decode: CTCSS, DCS, DTMF, 2-Tone or Selcall VHF NOAA Weather Alert Frequencies LM-600ANALOG KIT INCLUDES: Dual band capable receiver (requires optional LMH-100 enclosure for outdoor use) Dual band whip antenna AC adapter (12VDC-110/220V) PA Horn Speaker (25 ft. cord)- Indoor/Outdoor rated LM mounting bracket Note: Does NOT include Optional 2 Hr. Back-Up Battery (BP-LM-Li22)
$843.00$722.00
Ritron Ritron DTX Plus High Power Wireless Transceiver Data Modules
Ritron DTX+ HP Series HIGH POWER WIRELESS TRANSCEIVER DATA MODULES The High Power DTX+ HP Series is ideal for any system design where high performance RF specifications, fast TX/RX attach times, and high power or range are a requirement. High specifications permit integration into systems demanding the utmost performance in congested frequency environments. The DTX+ is available in UHF (450-470MHz) and VHF (136-174MHz) models. DTX+ HP KEY FEATURES VHF (136-174MHz)/ UHF (450-470MHz) Narrowband 30 Watts High-power 9-17VDC
$850.00
Ritron Ritron Teleswitch TS-442-ON UHF (450-470MHz) Wireless Switch Control
Ritron TS-442-ON TELESWITCH VHF CONTROLLED REMOTE SWITCH The Ritron Teleswitch TS-442-ON is a radio controlled remote switch that operates on UHF (450-470MHz) frequency. The TeleSwitch is ideal for any application where a contact closure is needed to remotely control a light, turn on/off a pump, activate a siren, etc. Utilizing an RF transceiver and two programmable DTMF decoders housedin a durable, weather-resistant enclosure, the TeleSwitch’s independently controlled relays can provide a contact closure output upon receiving a uniquely defined DTMF (Touch Tone) code. TS-442-ON KEY FEATURES: UHF (450-470 MHz) 1 or 5 Watt Transceiver Narrow Band PC Programmable 8-15VDC Operation Two Independent 10 Amp Relay Outputs Bright LED Status Indicators Rugged, Weather-Resistant Housing DTMF Decode Acknowledgement Tone Programmable Relay Control - Momentary or Latching RPS-TS Power Supply Included Mounting Bracket Included Designed and Made in the USA WARRANTY * 1-year manufacturer's warranty.
$1,161.00$995.00
Ritron Ritron Teleswitch TS-442-GN UHF (400-420MHz) Wireless Switch Control
Ritron TS-442-GN TELESWITCH VHF CONTROLLED REMOTE SWITCH The Ritron Teleswitch TS-442-GN is a radio controlled remote switch that operates on UHF (400-420MHz) frequency. The TeleSwitch is ideal for any application where a contact closure is needed to remotely control a light, turn on/off a pump, activate a siren, etc. Utilizing an RF transceiver and two programmable DTMF decoders housedin a durable, weather-resistant enclosure, the TeleSwitch’s independently controlled relays can provide a contact closure output upon receiving a uniquely defined DTMF (Touch Tone) code. TS-442-GN KEY FEATURES: UHF (400-420MHz) 1 or 5 Watt Transceiver Narrow Band (Government) PC Programmable 8-15VDC Operation Two Independent 10 Amp Relay Outputs Bright LED Status Indicators Rugged, Weather-Resistant Housing DTMF Decode Acknowledgement Tone Programmable Relay Control - Momentary or Latching RPS-TS Power Supply Included Mounting Bracket Included Designed and Made in the USA WARRANTY * 1-year manufacturer's warranty.
$995.00
Ritron Ritron Teleswitch TS-142-ON VHF (154-174MHz) Wireless Switch Control
Ritron TS-142-ON TELESWITCH VHF CONTROLLED REMOTE SWITCH The Ritron Teleswitch TS-142-ON is a radio controlled remote switch that operates on VHF (154-174 MHz) frequency. The TeleSwitch is ideal for any application where a contact closure is needed to remotely control a light, turn on/off a pump, activate a siren, etc. Utilizing an RF transceiver and two programmable DTMF decoders housedin a durable, weather-resistant enclosure, the TeleSwitch’s independently controlled relays can provide a contact closure output upon receiving a uniquely defined DTMF (Touch Tone) code. TS-142-ON KEY FEATURES: VHF (154-174 MHz) 1 or 5 Watt Transceiver Narrow Band PC Programmable 8-15VDC Operation Two Independent 10 Amp Relay Outputs Bright LED Status Indicators Rugged, Weather-Resistant Housing DTMF Decode Acknowledgement Tone Programmable Relay Control - Momentary or Latching RPS-TS Power Supply Included Mounting Bracket Included Designed and Made in the USA WARRANTY * 1-year manufacturer's warranty.
$1,161.00$995.00
Ritron Ritron Teleswitch TS-142-GN VHF (136-156MHz) Wireless Switch Control
Ritron TS-142-GN TELESWITCH VHF CONTROLLED REMOTE SWITCH The Ritron Teleswitch TS-142-GN is a radio controlled remote switch that operates on VHF (136-156MHz) frequency. The TeleSwitch is ideal for any application where a contact closure is needed to remotely control a light, turn on/off a pump, activate a siren, etc. Utilizing an RF transceiver and two programmable DTMF decoders housedin a durable, weather-resistant enclosure, the TeleSwitch’s independently controlled relays can provide a contact closure output upon receiving a uniquely defined DTMF (Touch Tone) code. TS-142-GN KEY FEATURES: VHF (154-174 MHz) 1 or 5 Watt Transceiver Narrow Band (Government) PC Programmable 8-15VDC Operation Two Independent 10 Amp Relay Outputs Bright LED Status Indicators Rugged, Weather-Resistant Housing DTMF Decode Acknowledgement Tone Programmable Relay Control - Momentary or Latching RPS-TS Power Supply Included Mounting Bracket Included Designed and Made in the USA WARRANTY * 1-year manufacturer's warranty.
$1,161.00$995.00
Ritron NRB-447D
UHF, 450-470MHz, 2 Watts, RadioNexus RF Transceiver.
$699.00
Ritron NRB-147M
Ritron - VHF MURS, RadioNexus RF Transceiver.
$699.00
Ritron NRB-147D
VHF, 150-165MHz, 2 Watts, RadioNexus RF Transceiver.
$699.00
Icom Icom F6122DD UHF Data Transceiver | 25W
Icom F6122DD UHF Data Transceiver The Icom F6122DD is a UHF (400-470MHz) Data Transceiver. This radio uses 4-level FSK modulation suitable for real-time data monitoring allowing for fast data transfer. With 25W and a BNC antenna connector, the F6122DD easily sends data/information over a radio frequency. This modem is an ideal alternative for areas with limited cellphone or internet connection, such as vehicle management for farming and airports, traffic monitoring for roads/highways, or remote system management for utilities (water works/electricity meters). IC-F6122DD KEY FEATURES: UHF (136-174MHz) 25W 9.6k/4.8kbps 9600bps (at 12.5kHz) and 4800bps (at 6.25kHz) data modeprogrammable RS-232 and RS-232 + Ethernet versions 4-level FSK modulation BNC antenna connector Individual, group and all calls Data encryption function (500 codes) IC-F6122DD KIT INCLUDES: Radio DC Power Cable Mounting Bracket Kit WARRANTY *2-year manufacturer's warranty on the radio. F6122DD Data Sheet
$800.00
Icom Icom F5122DD VHF Data Transceiver | 25W
Icom F5122DD VHF DATA TRANSCEIVER The Icom F5122DD is a VHF (136-174MHz) Data Transceiver. This radio uses 4-level FSK modulation suitable for real-time data monitoring allowing for fast data transfer. With 25W and a BNC antenna connector, the F5122DD easily sends data/information over a radio frequency. This modem is an ideal alternative for areas with limited cellphone or internet connection, such as vehicle management for farming and airports, traffic monitoring for roads/highways, or remote system management for utilities (water works/electricity meters). IC-F5122DD KEY FEATURES: VHF (136-174MHz) 25W 9.6k/4.8kbps 9600bps (at 12.5kHz) and 4800bps (at 6.25kHz) data modeprogrammable RS-232 and RS-232 + Ethernet versions 4-level FSK modulation BNC antenna connector Individual, group and all calls Data encryption function (500 codes) IC-F5122DD KIT INCLUDES: Radio DC Power Cable Mounting Bracket Kit WARRANTY *2-year manufacturer's warranty on the radio. F5122DD Data Sheet
$800.00
Icom Icom F5122DD 02 VHF Data Transceiver
Icom F5122DD VHF DATA TRANSCEIVER VHF136-174MHz data transceiver 9.6k/4.8kbps, 25W. *Discontinued. Please see F5122DD 12.
$750.00
Icom Icom CY6300 UHF IDAS Repeater | 50W
Icom CY6300 UHF IDAS PLUG AND PLAY REPEATER The Icom CY6300 is a UHF IDAS repeater with internal power supply. Built with the latest IDAS™ UR-FR5300 series repeater module, the CY-6300 series adds simulcast to the list of optional configurations. With the internal BBU capable 112/220V AC power supply, system deployments are easier with the all-in-one repeater/base station. It maintains the bold and robust 19” rack mountable CY series chassis. This repeater replaces the CY6000 Series (CY6001 (400-470MHz) and CY6002 (450-512MHz)). The CY6300 comes in two different frequencies: CY6301 (400-470MHz) and CY6302 (450-512MHz). CY6300 FEATURES UHF (400-470MHz or 450-512MHz) 50Watts Built-in power supply: 13.8V in or 110V AC in or 220V AC in Battery backup function with user supplied battery 3 RU tall - built-in rack handles 19” standard rack or cabinet mounting Powder-coated steel chassis N style bulkhead RF connectors for antennas Built-in grounding stud Heavy duty -temperature controlled 80 CFM cooling fan DB-25 rear connector interface for external equipment DC terminal strip for easy BBU connection 3 ethernet connections for networking gear or trunking bus connections Digital RAN Code decode 5-tone & DTMF Encode/Decode (analog) CTCSS Digital Features IDAS Simulcast (UC-FR5300 & CF-FR5300SC) IDAS Trunking-single or multisite (UC-FR5300 board & CF-FR5000 02) Receives analog and digital signals on a single channel NXDN Digital Air Interface Strongest site search Firmware upgrade over IP Configuration over IP WARRANTY * 1-year warranty.
$2,903.00
-
Icom Icom CY5300 VHF (136-174MHz) IDAS Repeater | 50W
Icom CY5300 VHF IDAS PLUG AND PLAY REPEATER The Icom CY5300 is a VHF (136-174MHz) IDAS repeater with internal power supply. Built with the latest IDAS™ UR-FR5300 series repeater module, the CY-5300 series adds simulcast to the list of optional configurations. With the internal BBU capable 112/220V AC power supply, system deployments are easier with the all-in-one repeater/base station. It maintains the bold and robust 19” rack mountable CY series chassis. CY5300 FEATURES VHF (136-174MHz) Built-in power supply: 13.8V in or 110V AC in or 220V AC in Battery backup function with user supplied battery 3 RU tall - built-in rack handles 19” standard rack or cabinet mounting Powder-coated steel chassis N style bulkhead RF connectors for antennas Built-in grounding stud Heavy duty -temperature controlled 80 CFM cooling fan DB-25 rear connector interface for external equipment DC terminal strip for easy BBU connection 3 ethernet connections for networking gear or trunking bus connections Digital RAN Code decode 5-tone & DTMF Encode/Decode (analog) CTCSS Digital Features IDAS Simulcast (UC-FR5300 & CF-FR5300SC) IDAS Trunking-single or multisite (UC-FR5300 board & CF-FR5000 02) Receives analog and digital signals on a single channel NXDN Digital Air Interface Strongest site search Firmware upgrade over IP Configuration over IP WARRANTY * 1-year warranty.
$2,903.00
Icom Icom FR5300 VHF Digital Repeater | 50 Watts
Icom FR5300 VHF REPEATER FOR ANALOG & DIGITAL RADIOS The Icom FR5300 is a repeater for two-way radios that works in analog and digital mode. This repeater works in VHF (136-174MHz) and 50W of power outage at 50% duty cycle and 25W at 100% duty cycle. The optional UC-FR5300 network/controller board provides IP network connectivity, and it is scalable to multi-site conventional, simulcast conventional, and Type-D trunking capabilities. The IC-FR5300/FR6300 is another addition to Icom’s robust series of professional repeaters that support countless systems worldwide. The IC-FR5300 series is the second generation IDAS Repeater, keeping system compatibility with the original IC-FR5000 series and continuing its unique package. It looks the same as the IC-FR5000, but a new CPU/FPGA platform is used. The IC-FR5300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna. Atlantic Radio offers its own line of duplexers that are compatible with the FR5300. These duplexers include tuning and a 2-year warranty. See more information here: Atlantic Radio VHF 50W 6-Cavity Duplexer FR5300 FEATURES VHF 32 Channels CW ID included Automatic battery backup DB-25 accessory connector Internal space for duplexer & pre-selector Fits 2 RF modules into unit PTT priority setting Low voltage alert New CPU/FPGA Platform RC-FS10 and VEPG4 Compatible Digital Features IDAS Simulcast (UC-FR5300 & CF-FR5300SC) IDAS Trunking-single or multisite (UC-FR5300 board & CF-FR5000) Receives analog and digital signals on a single channel NXDN Digital Air Interface Strongest site search Firmware upgrade over IP Configuration over IP ±0.1 ppm high frequency stability with 1 pps signal WARRANTY *2-year manufacturer's warranty on the repeater. FR5300 Data Sheet Atlantic Radio is an authorized Icom land mobile radio dealer.
$2,273.00
Icom Icom IP1100CV Network Radio Controller
Icom IP1100CV SYSTEM CONTROLLER FOR IP110H/IP100H WIRELESS LAN RADIOS The IP1100CV is a system controller for IP110H/IP100H wireless LAN radios which communicate using a wireless LAN network. It offers scalable, license-free communication using new or existing wireless networks. Easily expand your network by adding wireless access points for more coverage. Register and control up to 300 IP110H and IP100H WLAN radios, including the IP100FS terminal. Link multiple sites using the built-in 2.5 Gbps port and VPN router function. For example, the main office can talk with branch offices in different cities, states, or countries away through the internet. The auto-provisioning function automatically applies configuration settings when adding new radios to the network. The IP1100CV can also set up to 500 addresses with the IP110H for individual and group calls. The auto-provisioning function automatically applies configuration settings when adding new radios to the network. The IP1100CV can also set up to 500 addresses with the IP110H for individual and group calls. Programmable via web browser or USB drive Online firmware updates capable Security slot Requires BC-207S power adapter (not included) IP1100CV KEY FEATURES 300 WLAN Radios Can Be Registered Up to 500 IP110H Call Addresses Programmable 2.5 Gbps WAN Port and VPN Router Function 19-inch Rack Mount Design (optional) WLAN Radio System Programmable with a Web Browser IP1100CV KIT INCLUDES Magnet legs (4) Screws (4) Clamp Flat washer and screw WARRANTY *1-year manufacturer's warranty.
$1,795.00$1,499.00
Icom Icom VEPG4 RoIP Gateway
Icom VEPG4 RoIP Gateway Bridging LMR Systems with POC The Icom VEPG4 is a versatile RoIP (Radio over IP network) gateway unit, whichseamlessly interconnects LMR radios, LTE radios, IP communication terminals,IP phone systems and external devices. The VEPG4 can record incoming and outgoing calls to an external USB device connected to the VE-PG4. Up to four recording settings are programmable. The recording call type is selectable from All, Group, and Individual calls. In addition, the monitor function transfers the received audio data to an intended device. GPS position and status information from the IP501H/IP501M LTE transceivers can be received and transferred to a PC to track the location of the radio users or a user in a vehicle. The optional RC-FS10 remote communicator creates an IP-based virtual radio on a PC, and can communicate with land mobile radios, LTE radios, and IP communication terminals through the VE-PG4. VEPG4 KEY FEATURES Built-in RoIP, SIP gateway, IP router, IP PBX & IP communication terminal controller functions Call Recording to a USB Drive Microphone Connection for Base Operation Position and Status Information from Transceivers Remote Communicator Software, RC-FS10 (optional) Serial Pass-through Function SIP Server and IP-PBX Functions Router Functions with VPN Tunnel Half-width 1U Form Design Online Firmware Update Management Features SYSLOG and SNMP Telnet and SSH Ping Test and Traceroute Test Abnormal condition monitoring, such as LAN port link-down and SIP server registration error Administrator password SNTP server Security slot VEPG4 KIT INCLUDES Antennas Antenna bases with 1.5m (4.9 ft) cable BC-236 AC adapter Quick connectors WARRANTY *1-year manufacturer's warranty on the repeater. VEPG4 Data Sheet
$3,205.00$2,483.00
Icom Icom URFR6300 UHF Digital Repeater | 50 Watts
Icom URFR6300 UHF REPEATER FOR ANALOG & DIGITAL (NXDN) RADIOS The Icom URFR6300 is a repeater for two-way radios that works in analog and digital (NXDN) mode. This channel module works in UHF (400-470 or 450-512MHz) and 50 watts of power output. The URFR6300 is the perfect option for any UHF repeater application. Atlantic Radio recommends the URFR6300 for government, education, ports, hotels, condos, HOA, marinas, boats, hunting, construction, events and more. AVAILABLE URFR6300 REPEATER VERSIONS URFR6300 75 USA (450-512MHz Repeater module) URFR6300 81 USA ( 400-470MHz Repeater module) The Icom URFR6300 is programmable by Atlantic Radio or the end-user. For Atlantic Radio Programming Services, please contact us here: Contact Atlantic Radio. For programming, the URFR6300 requires an Icom OPC-2344 programming cable and CS-FR5300 (v1.21) cloning software. The OPC-2344 cloning cable is found here: ICOM OPC2344. The customer programming software is included with the purchase of a URFR6300 or OPC2344. Atlantic Radio offers its own line of duplexers that are compatible with the URFR6300. These duplexers include tuning and a 2-year warranty. See here for more information: Atlantic Radio UHF 50W 6-Cavity Duplexer UR-FR6300 KEY FEATURES UHF (400-470 or 450-512MHz) Digital (NXDN) Analog 32 Channels (1 zone) RF Output: 50 Watts 25 Watts 5 Watts (Hi, L2, L1) Sensitivity: Digital (1% BER) or Analog (12 dB SINAD) 13.6 V DC nominal N Type Connection WARRANTY *2-year manufacturer's warranty on the repeater. URFR6300 Data Sheet Atlantic Radio is an authorized Icom land mobile radio dealer.
$1,486.00$1,191.60
Hytera Hytera RD622i Compact DMR/Analog Repeater | Preowned
Hytera RD622i Compact Analog and Digital DMR Repeater The Hytera RD622i digital DMR repeater has 25 watts of power output. This unit has a built-in power supply and works in both analog and digital mode (DMR). * RD622i IS END OF LIFE AND HAS BEEN REPLACED WITH THE HR652. SEE PRODUCT INFO HERE: HR652. Hytera RD622i Repeater Key Features 1-25 Watts of RF Output Analog and Digital (DMR) 16 Channels Multiple DMR Sites via IP (License Required) SW00008 AES256 Encryption (License Required) - SW00018 Hytera RD622i Data Sheet
$1,999.00$1,195.00
Hytera Hytera RD982i-S Repeater for Digital (DMR) & Analog | Preowned
Hytera RD982i-S Digital DMR and Analog 50 Watt Repeater The RD982i-S Repeater is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well as integrated with Hytera SmartDispatch or other 3rd party GPS dispatching software. The RD982i Repeater is capable of being upgraded to trunking at a future date as capacity requirements increase. The analog version of the RD982i provides organizations with an easy migration path to digital technology. Hytera RD982i-S Main Features • RD982i-S 50W is an enhanced version of the RD982i DMR digital repeater• 100% continuous duty cycle from 5W to 50W• Up to 16 channels• Supports two simultaneous voice paths in digital mode• Supports operation in Analog and Digital mode• Auto detection between analog mode and digital mode• Multiple CTCSS/CDCSS in analog and mixed channel• Four programmable keys to improve ease-of-use and increase operator efficiency• Advanced heat sink design with thermal-controlled cooling fan for durable operation• External power supply• Supports built-in duplexer with Hytera built-in duplexer installation kit• Repeater Diagnostic and Control (RDAC)• Power on user logo programming• Multi-language menu display• Basic encryption (standard)• Enhanced encryption (license required) (License Required) - SW00018• SIP capable to support telephone interconnect• Supports XPT digital trunking (licensed required)• IP Site Connect (Analog and Digital mode) (license required) - SW00008• 1-Year Standard Warranty RD982i-S Data Sheet
$3,081.75$2,595.00
Ritron LIBERTYSYSTEM-JN
Ritron - Liberty repeater and Jobcom radio package.
$2,512.00
Ritron Ritron RRX-452 Patriot Repeater
Ritron RRX-452 NARROWBAND PATRIOT REPEATER The Ritron RRX-452 is a Patriot repeater used to extend the range of any UHF portable, mobile, callbox, or base station for conventional or trunking applications. All Models are 1-8 Watts. Please see below for model specifications. RRX REPEATER MODELS Model Description RRX-452-D40F0 1-8 Watts, with Duplexer, with 4 Amp Power Supply RRX-452-040F0 1-8 Watts, less Duplexer, with 4 Amp Power Supply RRX-452-000F0 1-8 Watts, less Duplexer, less Power Supply RRX-452-D40FP 1-8 Watts, with Duplexer, with Power Supply, and Telephone Interconnect
$1,665.00
Ritron Ritron RLR-465-N UHF Analog Liberty Repeater | 5 Watts
Ritron RLR-465-N LIBERTY UHF ANALOG REPEATER The Ritron RLR-465-N is a UHF (450-470MHz) Analog Liberty Repeater that extends the range of wireless communications whilst effectively eliminating dead spots on-site. The Liberty Repeater is used to extend the range of any UHF portable, mobile, callbox, or base station. This repeater is recommended for Golf Courses, Schools, Shopping Malls, Hotels, Hospitals, Manufacturing Plants, Amusement Parks, or Special Events. RLR-465-N KEY FEATURES UHF (450-470MHz) Narrow Band 1 Channel 5W Output at antenna N Connector 1 CTCSS or 2 DCS Tones RLR-465-N KIT INCLUDES: Integrated Full Duplex Repeater Duplexer RPS-1500 (10VAC-12VDC) Power Supply WARRANTY * 1-year manufacturer's warranty on this repeater.
$1,242.00$1,065.00
Ritron Ritron RLR-460 UHF Analog Liberty Repeater | 2 Watts
Ritron RLR-460 LIBERTY UHF ANALOG REPEATER The Ritron RLR-460 is a UHF (450-470MHz) Analog Liberty Repeater that extends the range of wireless communications whilst effectively eliminating dead spots on-site. The Liberty Repeater is used to extend the range of any UHF portable, mobile, callbox, or base station. This repeater is recommended for Golf Courses, Schools, Shopping Malls, Hotels, Hospitals, Manufacturing Plants, Amusement Parks, or Special Events. RLR-460 KEY FEATURES UHF (450-470MHz) Narrow Band 1 Channel 2W Output at antenna N Connector 1 CTCSS or 2 DCS Tones RLR-460 KIT INCLUDES: Integrated Full Duplex Repeater Duplexer RPS-1B 1(10VAC-12VDC) Power Supply WARRANTY * 1-year manufacturer's warranty on this repeater.
$1,067.00$915.00
Ritron Ritron RLR-465NX UHF NXDN Digital Liberty Repeater | 10 Watts
Ritron RLR-465NX LIBERTY UHF NXDN DIGITAL REPEATER The Ritron RLR-465NX is a UHF (450-470MHz) NXDN Digital repeater that extends the range of wireless communications whilst effectively eliminating dead spots on-site. The Liberty Repeater is used to extend the range of any UHF NXDN Digital portable, mobile, callbox, or base station. This repeater is recommended for Schools, Shopping Malls, Hotels, Hospitals, Manufacturing Plants, Golf Courses, Amusement Parks, or atSpecial Events. Notice: A change of frequency of more than 50kHz will require re-tuning of the duplexer. RLR-465NX KEY FEATURES UHF (450-470MHz) 10 Watts 1 Channel Frequency Range: Very Narrowband Full Duplex Radio and Built-in, 4 Cavity, Notch-Type Duplexer w/ “N” Type Connector Capable of up to 10 groups of RAN. Power ON and TX Transmit Indicator LED’s Frequency Stability: +/- 1 ppm (-30 C to +50 C) 110VAC to 13.8 VDC power supply 12VDC back-up capable (At less than 13.8VDC output limited to 8W) Compact size Lightweight PC Programmable – Duplexer and RF board requires manual tuning Built-In Mounting Flanges FCC and Industry Canada Approved RLR-465-N KIT INCLUDES: Integrated Full Duplex Duplex NXDN Digital Radio Repeater Built-in, 4-Cavity Notch-Type Duplexer RPS-1500 (10VAC-12VDC) Power Supply WARRANTY * 1-year manufacturer's warranty on this repeater.
$1,652.00$1,416.00
Icom Icom FR6200H Analog/IDAS Repeater | UHF | 50W | EOL (End of Life)
Icom FR6200H The Icom FR6200H is an Analog/IDAS repeater that works in UHF. This repeater operates a 100% duty cycle. The FR6200H comes in two frequency range versions: FR6200H 51 (400-470MHz) and FR6200H 61 (450-512MHz). *THIS PRODUCT IS END-OF-LIFE.
$3,780.00
Icom Icom FR5200H IDAS/Analog/Mixed Mode Repeater | VHF (136-174MHz) | 50W | EOL (End of Life)
Icom FR5200H The FR5200H is a VHF (136-174MHz) 50W IDAS/Analog/Mixed Mode repeater with a 100% duty cycle. *THIS PRODUCT IS END-OF-LIFE.
$3,780.00
Icom Icom FR6000 11 UR KIT
UHF 450-512MHz, 2 ch. repeater (FR6000 + URFR6000 installed)
$2,695.00
Icom Icom FR6000 01 UR KIT
UHF 400-470MHz repeater FR6000 + URFR6000 installed.
$2,695.00
Icom Icom FR6000 11 2CH KIT
UHF 450-512MHz 2 ch. system (2 repeaters, 2 power supplies)
$3,130.00
Icom Icom FR6000 01 2CH KIT
UHF 400-470MHz 2 ch. system (2 repeaters, 2 power supplies)
$3,130.00
Icom Icom FR6000 Analog/IDAS Repeater | UHF | EOL (End of Life)
Icom FR6000 The Icom FR6000 is an Analog/IDAS repeater that works in UHF. This repeater does not include a power supply. The FR6000 comes in two frequency range versions: FR6000 14 (400-470MHz) and FR6000 19 (450-512MHz). *THIS PRODUCT IS END-OF-LIFE.
$2,165.00
Icom Icom FR5000 01 UR KIT
136-174MHz, 2 ch. IDAS repeater (FR5000 + URFR5000 installed)
$2,695.00
Icom Icom FR5000 01 2CH KIT
136-174MHz 2 channel system (2 repeaters, 2 power supplies)
$3,130.00
Icom Icom FR5000 14 VHF (136-174MHz) Analog/IDAS repeater | PS Not Included
Icom FR5000 14 The Icom FR5000 14 is VHF (136-174MHz) analog/IDAS repeater without a power supply.
$2,165.00
Icom Icom CY6002 UHF (450-512MHz) IDAS repeater | EOL (End of Life)
Icom CY6002 The Icom CY6002 is a UHF (450-512MHz) IDAS repeater with power supply. *THIS PRODUCT IS END-OF-LIFE. PLEASE SEE CY6300 FOR REPLACEMENT.
$2,625.00
Icom Icom CY6001 UHF (400-470MHz) IDAS Repeater | EOL (End of Life)
Icom CY6001 The Icom CY6001 is a UHF (400-470MHz) IDAS repeater with internal power supply. *THIS PRODUCT IS END-OF-LIFE. PLEASE SEE CY6300 FOR REPLACEMENT.
$2,625.00
-
Icom Icom CY5000 VHF (136-174MHz) IDAS Repeater | EOL (End of Life)
Icom CY5000 The Icom CY5000 is a VHF (136-174MHz) IDAS repeater with internal power supply. The CY series is an all in one, plug and play digital and analog base station repeater. The CY has a robust and rack mountable chassis, auto battery backup, and it utilizes the IDAS UR repeater module, making it ready for everyday communications at full power. *THIS PRODUCT IS END-OF-LIFE. PLEASE SEE CY5300. CY5000 FEATURES VHF (136-174MHz) Internal 110/220VAC power supply Terminal screw connector for easy external battery connection DB-25 connector Three shielded data ports Silver-plated "N" — type bulkhead RF connectors Built-in grounding stud Built-in grounding stud Optional built-in duplexer Optional built-in pre-selector 80 CFM heavy duty cooling fan – draws air from the top vents across the UR module for cooling
$2,625.00
For industries that span great distances, such as transportation or shipping, finding radios that can stay in contact over long distances can often be a challenge. That’s why it’s important that you invest in radio repeaters. Repeaters receive the initial transmission from one radio and retransmit it so that the signal’s strength is renewed and can reach farther. Ham radio repeaters are a good example of this, as they help truckers keep in contact with one another while on the road.
Even with their naturally higher strength, digital radios can benefit from digital repeaters to expand their signal across hundreds of miles. Get in touch with Atlantic Radio today to learn more about our radio repeaters and how they can improve your industry.